Products

Home -- Products -- Dental Implant Detector

Dental Implant Detector

Name:
Dental Implant Detector LSRM911
Model:LSRM911
Function:
1.Sanitation and Environment.
2.Light and Easy to use.
3.Detect the dental Implant.

Description
Image
Configuration
Paking List
Download
Video

1.Feature:

(1).Sanitation and Environment.

(2).Light and Easy to use.

(3).Detect the dental Implant.

2.Operating the Unit:

(1).Turn the Unit on by inserting the Sensor (with the Protective Cover on it) so that the notice “TOP SIDE” faces in the same direction as the logo “CTI” on the Battery Cover.

(2).The bottom side of the Sensor should be gently clasped to the gum in the area intended for the implant.

(3).The Sensor should be slowly moved along the gum, keeping it in constant contact with the gum.

(4).When the LED turns from Blue to Green, the sensor is close enough to the Implant.

(5).Keeping the Sensor exactly above the found Implant, insert the tip of the Marker into the hole in the center of the Sensor and mark the Implant position by pushing the Marker into the gum, simultaneously twisting it several times for better marking.

(6).Reset the last found implant parameters by bringing the Sensor close to any metal object such as the Marker Handle and keep it attached to the Handle until the indicator switches from Blue to Yellow, then take it away.

The LED will switch back to Blue, indicating that the Unit is ready to be used again.

3.After Using the Unit:

(1).Turn the Unit off by extracting the Sensor.

(2).Remove the Protective Cover.

(3).Twist off the Marker from the Marker Handle.

(4).Dispose of the used Sensor, Protective Cover and Sensor.

4.Sterilization:

(1).The Marker Handle should be autoclaved at 135C (249.8F), for a minimum of 4 minutes with a sterilization pouch. Minimum Drying Time after sterilization: - 10 minutes.

(2).Sterilize the surface of the Unit by wiping it with a piece of gauze dampened with Ethanol for Disinfection (Ethanol 70~80%). Wring the gauze out to make sure it is not too wet.

5.Storage In The Clinic:

Keep the Unit, the sterilized Marker Handle and the Disposable Sets in the closed Kit Box.

6.Working Life:

The Working Life of this equipment is at least 6 years from the date of shipment, provided it is regularly and properly inspected and maintained.

7.Service:

The dental IMPLANT POINTER cannot be repaired and it will be replaced by a new one,

in case of any malfunction, subject to the warranty conditions.

8.Warranty:

(1).The manufacturer gives a guarantee for one year starting from the date of purchase. Within this period any defect that is due to faulty manufacturing or material will be remedied by replacement at the judgment of the manufacturer or its distributor.

(2).Warranty service: In the event of a claim under this guarantee, the device is to be sent to the service facility of the distributor, postage and shipping paid, including a short description of the problem, and a copy of the sales receipt from the dealer as proof of purchase and title to warranty. Always ship prepaid. The distributor does not accept collect shipments.

(3).In the event of damage caused by wear and tear, careless handling and any repairs, the warranty ceases to be valid. This guarantee may not form the basis for any claims for damages, in particular for compensation of consequential damages.

(4).The buyer assumes responsibility for damage due to dropping the unit, improper use and utilization of products and chemicals for cleaning other than those stated in this instruction manual. It is the customer’s responsibility to use the exact type of battery defined in the specifications.

(5).This warranty does not include the external accessories, Marker Handle, batteries, or transportation costs.

9.Technical Specifications:

(1).Power Source:1.5 V(One AA Alkaline Battery);

(2).Rated Current Max:0.04A;

(3).Power Consumption Max:0.06VA;

(4).Dimensions:170mm * 24mm;

(5).Weight:50g.